Butt Weld Pipe Fitting

Butt weld fittings are used wherever liquid, gas, chemical and other fluid are created, processed, transported, especially in large size piping system. Such as Oil and gas industries, Midstream, Shipbuilding, Power plants, Food plants, Pharmaceuticals, etc.Butt weld fittings offer various advantages over other fittings. Butt weld causes less material usage, which means lower material cost and lower weight. Also it permits greater freedom in designing the layout, less space, but greater strength.

Longtaidi has an extensive range of equipment to weld overlay clad and machine all manner of pipe fittings including flanges, elbows, tees, end caps, and special fittings. This includes vertical and horizontal machines and jigs to suit all diameters from 1/2” to more than 128”.

Reducer

A reducer is a kind of pipe fitting used in process piping that reduces the pipe size from a larger bore to a smaller bore (inner diameter).A reducer allows for a change in pipe size to meet hydraulic flow requirements of the system, or to adapt to existing piping of a different size. The length of the reduction is usually equal to the average of the larger and smaller pipe diameters.

Tee

Steel pipe tee has three branches that can change fluid direction. It has T-shaped or Y-shaped, and include Equal Tee and Reducing Tee (Reducer Tee). Steel tee is widely used in pipe networks for convey liquids and gases.

Cross

Pipe crosses, also known as four-way fittings, have one inlet and three outlets and often feature solvent-welded socket, or female-threaded ends. The ends are positioned at 90-degree angles and the threads are designed to create a stable grip and secure connection to male pipe fittings.

Elbow

Steel pipe elbow is a key part in a pressure piping system used to change the fluid flow direction. It is used to connect two pipes with same or different nominal diameters, and to make the pipe and thus the fluid direction turn to a certain direction of 45 degree or 90 degree. This change in fluid flow direction adds pressure losses to the system due to impact, friction and re-acceleration.

Cap

Steel Pipe Cap is usually welded to the pipe end or mounted on the external thread of the pipe end to cover the pipe fittings. To close the pipeline so the function is the same as the pipe plug.

Barred Tee

A barred tee is a tee or any fitting with a branch used in pipelines that is pigged and has a restriction bar welded internally preventing the pig from traveling down a branch connection.  The bars are installed so they are flush with the inside diameter of the pipeline to keep the pig from hanging up when it passes through.  The bars should be of a similar or identical material as the parent material.

About Butt Weld Pipe Fitting Price